|
換熱器是一種非常好的節能設備，可以將原本會浪費掉的能量加以重新利用，翅片管換熱器就是換熱器大家庭的一員，今天翅片管廠家小編就來為大家介紹下翅片管換熱器的一些工作原理以及它的特點等情況，方便大家對于翅片管換熱器有一個更加好的了解。
Heat exchanger is a very good energy-saving equipment, which can reuse the energy that would have been wasted. Fin-tube heat exchanger is a member of the heat exchanger family. Today, the fin-tube manufacturer Xiaobian will introduce some working principles and characteristics of fin-tube heat exchanger for you, so as to facilitate your understanding of fin-tube heat exchanger. The film tube heat exchanger has a better understanding.
翅片管換熱器原理—翅片管換熱器的特點
The principle of finned tube heat exchanger -- characteristics of finned tube heat exchanger
1.傳熱效率高 由于翅片對流體的擾動使邊界層不斷破裂，因而具有較大的換熱系數；同時由于隔板、翅片很薄，具有高導熱性，所以使得翅片管換熱器可以達到很高的效率。
1. Heat transfer efficiency is high because the fin disturbance to the fluid causes the boundary layer to break up continuously, so it has a larger heat transfer coefficient. At the same time, because the partition and fin are very thin and have high thermal conductivity, the fin-tube heat exchanger can achieve high efficiency.
2.緊湊 由于翅片管換熱器具有擴展的二次表面，使得它的比表面積可達到1000㎡/m3。
2. Compact finned-tube heat exchanger has an extended secondary surface, so its specific surface area can reach 1000_/m3.
3.輕巧 原因為緊湊且多為鋁合金制造，現在鋼制，銅制，復合材料等的也已經批量生產 。
3. The reason for lightness is compact and mostly made of aluminium alloy. Now steel, copper and composite materials have been produced in batches.
4.適應性強 翅片管換熱器可適用于：氣－氣、氣－液、液－液、各種流體之間的換熱以及發生集態變化的相變換熱。通過流道的布置和組合能夠適應：逆流、錯流、多股流、多程流等不同的換熱工況。通過單元間串聯、并聯、串并聯的組合可以滿足大型設備的換熱需要。工業上可以定型、批量生產以降低成本，通過積木式組合擴大互換性。
4. The finned-tube heat exchanger with strong adaptability can be applied to heat transfer between gas-gas, gas-liquid, liquid-liquid and various fluids, as well as phase change heat transfer with collective change. Through the arrangement and combination of the runners, it can adapt to different heat transfer conditions, such as countercurrent, cross flow, multi-stream, multi-pass flow and so on. Through the combination of units in series, parallel connection and series parallel connection, the heat exchange needs of large equipment can be satisfied. Industry can be stereotyped and mass produced to reduce costs and expand interchangeability through building blocks.
5.制造工藝要求嚴格 工藝過程復雜。容易堵塞，不耐腐蝕，清洗檢修很困難，故只能用于換熱介質干凈、無腐蝕、不易結垢、不易沉積、不易堵塞的場合。
5. the manufacturing process is strict and the process is complicated. It is easy to plug, not corrosion-resistant and difficult to clean and repair, so it can only be used in situations where heat transfer media are clean, non-corrosive, not easy to scale, not easy to deposit and not easy to plug.
以上就是為大家介紹的翅片管換熱器的一些工作原理及特點，希望大家可以參考了解，當我們大家以后需要購買使用翅片管換熱器的話，相信肯定可以給我們帶來非常不錯的使用效果，節省更多的能量資源。
The above is to introduce some of the working principles and characteristics of finned tube heat exchanger, I hope you can refer to understand, when we need to buy the use of finned tube heat exchanger in the future, I believe that it can certainly bring us a very good use effect, save more energy resources.
辛苦整理.轉載請注明
|
